TriDrive Resin Bound Driveway / Path Kit with Aggregate

Please be aware that from 24th August 2023, all professional and industrial workers (employed or self-employed), using mixtures containing diisocyanates at a concentration of 0.1% or more (e.g., insulation and filler foams used in construction etc), must undergo mandatory training.

The FibreGlassDirect Resin Driveway / Path Kit is a resin bound surfacing sytem. Included in this kit is a Polurethane, two-part system and a choice of high-quality dried natural aggregate with a mix of sizes.

This resin bound sytem is versatile, suitable for external surfacing, internal flooring, and low-maintenance tree pit surfacing. It provides a contemporary alternative to traditional concrete, block paving, pattern-imprinted concrete, or asphalt. Utilising a Forced Action Mixer, the system is mixed thoroughly before being compressed, leveled, and firmly consolidated to ensure a smooth surface, effectively eliminating any irregularities.

It is perfect for refurbishment and enhancing of driveways or pathways. 

• UV Stable
• Strong and Durable
• SUDS Compliant
• Low Maintenance

Please note these products will be delivered via a pallet due to the overall weight of this kit.

Application Guidelines:

• The TriDrive Resin Bound Kit should be applied to a substrate of locking gravel grids with 20mm stone filled with 2 x 100m 40mm type 1 aggregate sub-base. The product can be laid on a solid Concrete base (older than 28 days) or Tarmac (older than 14 days) but won’t be SUDS compliant
• It is important to note that the TriDrive Resin Bound System is only as good as the surface it has been laid on
• We do not advise laying on flags/block paving as it will crack
• Mark out 3.1m2 sections of driveway prior to mixing (4m2 for pathways)
• Pour Part B into Part A and use a Paddle Mixer until uniformed (mixed together)
• Ensure the Aggregate is mixed in the Force Action Mixer for 3 minutes
• Add the pre-mixed Kit to the Aggregate and leave for 90 seconds
• Mix for a further 3 minutes
• Line a wheelbarrow with non-stick film and pour in the mix
• Pour the mix into the marked section from the non-stick film and work to a flat

Warning! Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.’ Protective gloves to be supplied with this product.



Please be aware that from 24th August 2023, all professional and industrial workers (employed or self-employed), using mixtures containing diisocyanates at a concentration of 0.1% or more (e.g., insulation and filler foams used in construction etc.), must undergo mandatory training.

Danger
Hazard Statement(s) - TriDrive Resin Bound - Part B H319: Causes serious eye irritation.
H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H373: May cause damage to organs through prolonged or repeated exposure.
H335: May cause respiratory irritation.
H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H351: Suspected of causing cancer.
H332: Harmful if inhaled.

Precautionary Statement(s) P260: Do not breathe dust/fume/gas/mist/vapours/spray.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P284: [In case of inadequate ventilation] wear respiratory protection.
P302+P352: IF ON SKIN: Wash with plenty of water/…
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+313: IF exposed or concerned: Get medical advice/attention.